The Best Gravy Recipe (2024)

Learn how to make a flour gravy that’s delicious and has the correct thickness every single time. The ratio of flour to fat to stock is given as well as the method for how to combine everything to make it taste amazing.

Making gravy used to be a mystery to me. I’d add flour to my roast’s drippings and maybe some broth or stock. Then season it up, stir it up, and simmer it up. Sometimes it would be delicious, thick but not too thick, meaty but not overpowering. Other times, it would taste a bit like flour, water, and salt. Too thin. Just plain not good.

I did some research and started making notes about what I was doing. I’m going to tell you the stuff that worked and what led to me being able to make perfect gravy every single time.

Jump To:

1. Video: Steps For Perfect Gravy
2. Ingredients
3. How To Make Gravy Perfectly Every Time
4. Frequently Asked Questions
5. More Gravy Recipes
6. Podcast Episode: How To Make Gravy
7. The Best Gravy Recipe

Gravy isn’t complicated but if you want to be great at it you need to understand why you’re doing each step. What I’ve done is to put a very lengthy explanation here with pictures and all the info you need. It has the method and also the gravy ratio for how much fat to use with how much flour and how much stock or broth.

Thispost is going to tell you how to make a gravy using flour. All-purpose white flour. You would use a different method if using cornstarch or any other flour as a thickener. If you want to use cornstarch, amounts are given over here in my Instant Pot Gravy recipe and also in this delicious Cornstarch Gravy Recipe.

As I said, the instructions are a bit lengthy but, at the bottom of this article, there’s a much shorter set of instructions in printable form that you can take into the kitchen with you.

If you have any questions, please put them in the comments below. I’m happy to answer and help you make the best gravy of your life, and I hope you’ll then keep making it for the rest of your life. It’s easy once you’ve got it down. Promise.

Video: Steps For Perfect Gravy

Ingredients

There’s only a few ingredients you need to create a delicious gravy from scratch. First, you’ll need butter or fat that has been rendered from your roast. You also want plenty of drippings from roasting your meat with the fat removed. Not making a roast or don’t have enough drippings? Not a problem, see my Gravy without Drippings recipe or keep reading to discover my other solutions.

Other than that, all you need is some all-purpose flour along with salt, pepper, and any other seasonings you want. Let’s get started on my best gravy recipe.

How To Make Gravy Perfectly Every Time

Step #1: Make Good Drippings

Drippings are the liquid (fat and juices) that pool at the bottom of your roasting pan when you cook a large piece of meat or poultry. The thing is, sometimes you don’t get a lot (or any) drippings. So I’ve found a way to get nice concentrated meat juices no matter what.

(Side Note: It is totally possible to make gravy without drippings if you, for instance, are a vegetarian or aren’t making a roast but want gravy anyhow. The method is a bit different but the results are great. Learn how to make gravy without drippings here).

To make sure that I have lots of good drippings, even from a small roast, I put unsalted store-bought broth in the bottom of the roasting pan while the roast cooks. Just a quarter of an inch or so.

To get amazing drippings when roasting a turkey, head to this recipe. I cannot say enough good things about how amazing the gravy from this turkey end up!

Why do you need good drippings?

I first explained how and why to do this when I did the instructions for How to Roast Pork Perfectly over here.But basically, that broth evaporates as the roast cooks. As it does, some of the broth is left on the sides and bottoms of the pan. Those bits caramelize there. Midway through roasting, add more liquid and it will wash those caramelized bits into your juices making them more delicious.

Also, by putting broth in the bottom of the pan I counteract something that can happen with roasts. Sometimes you get nice juices coming off of the roast. Other times, not as much. When there’s less they can sometimes burn a bit on the bottom of the pan. A mild caramelization of juices is fantastic. But too much and your drippings will taste burnt and then so will your gravy.

Having the broth in the bottom of the pan stops the possibility of burning. Instead, juices that fall from the roast drop into the broth and mix in there.

Step #2:Separate The Juices

Pour all the juices from the roasting pan into a gravy separator.

This is like a measuring cup with a long spout that goes right to the bottom of the cup. The fat of your drippings will rise to the top and the tasty juices will stay at the bottom.

When you pour from a gravy separator, the spout is down at the bottom so it gets your juices out first, not your fat. (Although we are going to use some of that fat. Don’t you worry!)

Step #3: Get All The Flavor From The Pan

You need to get all of the flavor out of the roasting pan.

I use a spatula to make sure I’m getting all the browned bits and then anything else from the bottom of the pan.

Why I don’t make gravy in a roasting pan:

Unlike a lot of people, I don’t make my gravy right in the roasting pan. I find that it’s too big and is harder to incorporate the ingredients.

Instead, just use that spatula like I said and make sure you get all the goodness out. After using the spatula, if there’s a lotof nice caramelization on the roasting pan, pour some wine or water (1/2 cup should do) in there and bring it to a simmer, stirring around and then add that to the juices in your gravy separator.

Step #4: Ratio Of Fat, Flour, And Liquid For A Perfect Roux Gravy

I should say that there are several different methods to make gravy. My favorite gravy is a flour roux gravy because I feel like I really have control of the amount I make and the eventual thickness. So that’s what I’m explaining here.

What you do is decide how many servings of gravy you need and then work from that towards the above ratio to get your amounts.

Let’s figure out the amounts we need:

You’ll want 1/3 – 1/2of a cup of gravy per person. So if you need 6 servings then you want 2-3 cups. I tend to go with the higher amount because I like leftover gravy. (For ideas of what to do with leftover gravy, check this out!). But probably most people can go with the smaller amount.

For 6 people we need 3 cups of gravy so we’ll need:

• 4.5 tablespoons of fat (that’s 1.5 tablespoons fat X 3 cups of gravy = 4.5 tablespoons fat)
• 4.5 tablespoons of flour (that’s 1.5 tablespoons flour X 3 cups of gravy = 4.5 tablespoons flour)
• 3 cups liquid (6 people X 1/2 cup liquid = 3 cups liquid)

Now that we’ve used our gravy ratio to get our measurements, we canmake our roux gravy.

Step #5: Make The Roux

Use a measuring spoon to scoop the right amount of fat from the top of the gravy separator.

Pour the fat into a medium saucepan.Using the fat from the roast instantly gives your gravy extra roast flavor. If you don’t have that much fat on the top of your gravy separator, or if you don’t really like this idea, go with unsalted butter for your gravy recipe.

Put the butter in the medium saucepan and melt it over low heat. Then remove it from the heat and proceed with the below.

Add the same amount of flour to the saucepan as you have fat (we’re going with 4.5 tablespoons of each for 6 people).

Note: The following is NOT happening over the heat. You do this part at the counter.

Whisk the fat and flour together into a paste.

(FYI, the paste you just made is called a roux. You can use a roux like this as a base for all kinds of sauces and soups).

Step #6: Make Your Drippings Tasty

Taste First

Before you add any of the drippings to your roux, taste them. Sometimes a lot of salt or other seasoning from the outside of the roast gets washed off into your drippings.

If they’re really salty, you need to know that before you add them to the gravy.Pour a little into a bowl and slurp. They should be meaty and flavorful but not salty.

If your drippings taste great, proceed with step #7 below.

What to do if your drippings don’t taste great

If not, pour them into a large bowl, leaving the fat in the gravy separator (you don’t need this fat anymore. Discard it or save it for another use). To the liquid in the bowl, add unsalted store-bought broth or stock.

If you’re making chicken, pork, or veal gravy, use chicken broth. For beef gravy, use beef broth. You can instead use water or wine. Just make sure you’re not diluting the meaty flavor too much. If the meat flavor is very intense, water and wine will be great. If it’s less intense, you need that broth for your gravy recipe.

Keep adding broth, stirring and tasting until your liquid has a nice unsalty flavor.

Step #7: Get The Right Amount Of Liquid

Now make note of how much liquid you have. Remember, our goal this time is 3 cups of gravy so the recipe calls for 3 cups of liquid. How much do you have? If it’s more than 3 cups, you’re not going to use it all. You can add the extra to your mashed potatoes instead of milk, freeze it for later, or discard it.

If, on the other hand, you have less than 3 cups, then add to it. As noted above, you can use unsalted broth or stock, wine, or water. Only go with wine or water if the drippings are very meaty flavored. If they’re not, stick with broth or stock. Make sure it’s unsalted though. Gravy can get salty quickly as it simmers and reduces. You want control over that salt as much as possible.

Step #8: Actually Making Gravy

Whisk about one-sixth of your liquid into your butter and flour roux. You want a nice smooth paste.

Pour in a bit more and whisk it some more. You want it to be smooth after each addition. Do it a couple more times. Then you can go ahead and slowly stream in the rest of the liquid, whisking the entire time to make sure you don’t have any lumps. (If there are a few lumps, don’t worry. We’ll be straining it later).

Step #9: Heat And Cook The Gravy

Once all of the liquid is in and it’s whisked and smooth, put the saucepan over medium-high heat. Stir often until it comes up to a boil.

Reduce heat to low and simmer for a minute or two so the gravy thickens a little.

Step #10: Taste And Season The Gravy

Taste the gravy. What you want now is to check for seasonings. It might need a little salt and pepper. Add small amounts at a time because it can get salty quickly.

I also add poultry seasoning to chicken and pork gravies. Or whatever seasoning I put on the roast. I don’t like to add much though(about 1/4 teaspoon to 3 cups gravy). I like the gravy to taste rich and meaty. I don’t want it to cover up the flavor of the other foods on my plate.

Step #11: Strain the Gravy (optional)

OK, one last step, and it’s optional. For reasons I don’t understand, some people love lumpy gravy. Well, maybe I do get it. I also like bits and pieces of tasty stuff floating in my gravy, though not so much lumps of flour. Whatever.

Anyhow, if it’s just for us, I skip this. If it’s for company, I do it. I sit a fine mesh sieve over my gravy boat and strain the gravy in (if you’re worried about making a big mess getting it through there, strain it into a large bowl and then pour it into your gravy boat).

There you have it. That’s how to make gravy using a roux perfectly, each and every time.

Frequently Asked Questions

Here are some questions that I’ve been asked about this gravy recipe. Have another question for me? Leave it in the comments below the recipe and I’ll try my best to get you an answer.

This post originally appeared in November 2015 and was revised and republished in October 2022. This post contains Amazon affiliate links.